index
 trans home
search
e-mail
Assembly Systems Home Page / Tool Selection / 67 Tools Selection
Request for Quote
To receive a quote on certain tools select the check
box beside the model number and then select
request for quote at the bottom of the page.
Cleco Inline Floating Spindle
Model Number
 Torque Range Max. Speed Float Output
Drive
Size
 MinimumCenter to Center Weight* Length Drawing Parts Manual
ft. lbs.
 Nm
 RPM
 in.
 mm
 in.
 mm
 lbs.
 kg
 in.
 mm
 DXF
 IGES
67ES65Z4 10.0-47 13.0 -64 533 0.69 17.5   1/2 1.31 33 10.8 4.9 21 533      
67ES105Z4 15.0-77 21-104 330 0.69 17.5   1/2 1.31 33 10.8 4.9 21 533      
67ES135Z4 20-100 27-135 245 0.69 17.5   1/2 1.31 33 10.8 4.9 21 533      
67ES190Z6 28-140 38-190 165 0.75 19   3/4 1.31 33 15.6 7.1 22 559      
67ES285Z6 42-210 57-285 115 0.75 19   3/4 1.31 33 15.6 7.1 22 559      
67ES385Z6 57-285 77-386 83 0.75 19   3/4 1.31 33 15.6 7.1 22 559      
67ES475Z6 70-350 95-475 67 0.75 19   3/4 1.31 33 16 7.3 22.4 569      
67ES610Z6 90-450 122-610 50 0.75 19   3/4 1.31 33 16 7.3 22.4 569      
67ES850Z8 125-625 170-848 33 1 25 1 1.5 38 20 9.1 23.8 605      
47ES1050Z8 155-775 210-1050 27 1 25 1 1.5 38 20 9.1 23.8 605      
67ES1670Z8 246-1230 334-1668 17 1 25 1 1.5 38 20 9.1 23.8 605      
67ES2060Z8 304-1520 412-2060 14 1 25 1 1.5 38 20 9.1 23.8 605      
*Weights are without tool cable or reaction bar if so equipped.
General: All tools must be used with a approved Cooper Tools cable and controller.
Standard Equipment: Matrix Connector.

 
a

privacy
Copyright © 2000-2005 Cooper Industries, LLC. All rights reserved.